Page Comparison

...

Top level configuration elements	Description	Default value
`<action>`	Action to execute. These can be: Container actions: `configure`, `start`, `restart`, `run` or `stop` Deployer actions: `deploy`, `undeploy` or `redeploy` Cargo Daemon actions: `daemon-start` or `daemon-stop`	No default
`<containerId>`	Id of the container to use. Valid values can be found in the description page for each container	No default
`<containerType>`	The container's type. Valid values are `installed`, `embedded` and `remote`	Default value is `installed`
`<home>`	Location where the container is installed. If specified in conjunction with the `<zipUrlInstaller>` element, it will override the home directory defined by the installer	No default If the user has not defined any `home` nor `<zipUrlInstaller>` element then the Ant task will automatically attempt to download the container using the URL used by its tests (see the Tested On section of each container).
`<zipUrlInstaller>`	Defines the location of a container distribution zip that will be downloaded and installed	No default If the user has not defined any `home` nor `<zipUrlInstaller>` element then the Ant task will automatically attempt to download the container using the URL used by its tests (see the Tested On section of each container).
`<timeout>`	The timeout after which Cargo reports an error if the container is not started or stopped	`120000` ms (2 minutes)
`<systemProperties>`	List of `<key>value</key>` pairs to be passed as System properties to the container when it is started. You can also use the `<systemPropertiesFile>` element to load system properties from a file.	No default
`<extraClasspath>`	Additional classpath entries for the classpath that will be used to start the containers.	No default
`<sharedClasspath>`	Classpath entries for the classpath that will be shared the applications deployed in a container. Shared application classpath deployment is only available for local containers which support shared Application Classpaths.	No default
`<log>`	Path to a file where Cargo logs are saved	Logs to the Ant console if no log file is specified
`<output>`	Path to a file where container logs are saved	Logs to the file specified by the `<log>` element or to the Ant console if no such file has been specified
`<append>`	If `true`, then the file specified by `<output>` will not be erased across different runs	`false`
`<configuration>`	Definition of a Configuration	Defaults to a standalone configuration if the container is of type local and a runtime one if it's of type remote
`<daemon>`	Additional configuration that is used when deploying with the Cargo Daemon.	For more information, please read: Cargo Daemon.

...

<configuration> elements

Description

Mandatory?

Default value

<type>

Configuration's type. Valid values are standalone, existing and runtime

standalone

<home>

For standalone configuration this is the location where Cargo will create the configuration and for existing configuration this is where it is located

No default

<properties>

Values to use for various Configuration properties.

You can also use the <propertiesFile> element to load configuration properties from a file.

Default configuration properties

Note that these configuration properties can also be overriden using Java properties; for example:

Code Block
ant -Dcargo.servlet.port=8082

<deployables>

A list of deployables that are going to be deployed in the container when it is started or when deploy / undeploy is called.

No default

<fileConfigs>

List of Configuration files that are to be added to a local container's configuration. Each file is specified using a <fileConfig> element. Cargo token replacement is applied to the files and any existing file is overwritten.

No default

<files>

List of files that are to be added to a local container's configuration. Each file is specified using a <file> element.

No default

<xmlReplacements>

Values to use for various XML replacements.

No default

<users>

List of users to be created in container configuration.

No default

List of datasources to be created in container configuration.

No default

Anchor

	fileconfig
	fileconfig

`<fileConfigs>` elements	Description	Default value
`<file>`	The configuration file or directory containing configuration files.	No default
`<todir>`	The target directory, relative to configuration home, where the file should be copied	If not specified, the file will be copied to the configuration's home directory
`<tofile>`	The target file name to use	The original file name

Anchor

	file
	file

`<file>` elements	Description	Default value
`<file>`	The file, or directory, to add	No default
`<todir>`	The target directory, relative to configuration home, where the file should be copied	If not specified, the file will be copied to the configuration's home directory
`<tofile>`	The target file name to use	The original file name
`<configfile>`	Indicates if Cargo token replacement should be applied (`true`) when copying. Do not use this option on a non-ascii file as it will corrupt it!	`false`
`<overwrite>`	If any existing file should be overwritten or not	`true`

Anchor

	deployable
	deployable

`<deployable>` elements	Description	Default value
`<type>`	Deployable type, i.e. `war`, `ear`, `ejb`, etc.	No default
`<file>`	The deployable file.	No default
`<pingURL>`	URL on which to ping the deployed or undeployed application (to check if deployment or undeployment is successful), that should return an HTTP OK response only after the deployment is complete. If not set, the deployed or undeployed application will not be pinged, hence the deployment considered as complete as soon as the target server's method returns successfully.	No default
`<pingTimeout>`	If `<pingURL>` is set, the number of milliseconds after which the ping fails the build if still not successful.	`20000` (i.e., `20` seconds)
`<properties>`	User-defined properties of a deployable.	No default

Anchor

	prop2
	prop2

`<properties>` elements	Deployable Type	Description	Default value
`<context>`	WAR	The context name to use when deploying the web application.	Default's to the file name without the extension
`<war>`	WAR	The path of the WAR being deployed.	Default's to the file name without the extension
`<ear>`	EAR	The path of the EAR being deployed.	Default's to the file name without the extension
`<name>`	EAR	The name of EAR deployable (it can be anything, there's no special rule).	Default's to the file name without the extension
`<ejb>`	EJB	The path of the EJB being deployed.	Default's to the file name without the extension

...

`<zipUrlInstaller>` elements	Description	Default value
`<url>`	URL from which to download the container's ZIP or TAR.GZ file.	No default
`<downloadDir>`	Directory in which the `zipUrlInstaller` should download the container's ZIP or TAR.GZ file.	`${java.io.tmpdir}/cargo/installs`
`<extractDir>`	Directory in which the `zipUrlInstaller` should extract the container's ZIP or TAR.GZ file.	`${project.build.directory}/cargo/installs`
`<proxy>`	Proxy server settings, if required.	No default

Anchor

	proxy
	proxy

`<proxy>` elements (under the `zipUrlInstaller` element)	Description	Default value
`<host>`	Proxy host name or IP address.	No default
`<port>`	Proxy port.	Very probably `80`
`<user>`	User name to connect to the proxy server.	No default
`<password>`	Password to connect to the proxy server.	No default

Anchor

	user
	user

<user> elements Description Mandatory? Default value

<name>

User name.

No default

<password>

User password.

No default

<roles>

List of roles which should be assigned to user.

Example of roles configuration:

Code Block

language	xml

<roles>
    <role>cargo</role>
</roles>

No default

Anchor

	datasource
	datasource

`<datasource>` elements	Description	Default value
`<jndiName>`	JNDI name where to find this DataSource.	No default
`<connectionType>`	Type of this DataSource, for example: `javax.sql.XADataSource`	No default
`<transactionSupport>`	Transaction support of the DataSource, for example: `XA_TRANSACTION`	No default
`<driverClass>`	The class name of the driver, for example: `org.hsqldb.jdbcDriver`	No default
`<url>`	DataSource connection URL.	No default
`<username>`	DataSource username.	No default
`<password>`	DataSource password.	Empty string
`<id>`	Identifier used in configuration files.	No default
`<connectionProperties>`	Extra properties passed to the DataSource.	No default

Anchor

	daemon
	daemon

...

`<daemon>` elements	Description	Mandatory?	Default value
`<classpaths>`	A list of `<classpath>myclasspath</classpath>` items, that will be added by the JVM launcher when starting a container.		No default
`<properties>`	A list of properties used to configure the Cargo Daemon.		No default

`<properties>` elements	Description	Default value
`<cargo.daemon.url>`	URL to connect with the daemon.	No default
`<cargo.daemon.handleid>`	The handle id to register this container with.	No default
`<cargo.daemon.autostart>`	When set to `true`, the dameon will automatically restart the container if the daemon notices it is stopped.	`false`
`<cargo.daemon.username>`	Username used when authenticating against the daemon host	`admin`
`<cargo.daemon.password>`	Password used when authenticating against the daemon host	`""` (empty String)	Empty string

Versions Compared

Old Version 7

New Version Current

Key